Sony XDS-PD1000 Operation Manual page 114

Item number Item name
208 PROTOCOL FOR REMOTE(9P)
Sub-item
1 #2 (PB)
2 #1 (REC)
212 VIDEO REMOTE CONTROL
SELECT
Item number Item name
311 ANALOG AUDIO EDIT PRESET
REPLACE FOR CH1
312 ANALOG AUDIO EDIT PRESET
REPLACE FOR CH2
313 ANALOG AUDIO EDIT PRESET
REPLACE FOR CH3
314 ANALOG AUDIO EDIT PRESET
REPLACE FOR CH4
317 AUDIO EDIT MODE
114
Setup Menu
Menu items in the 200s, relating to the remote control interface
Settings
Select the protocol used with a REMOTE (9P) connector, for each port.
Select the protocol used with the playback port.
VTR: Sony 9-pin VTR protocol
VDCP: VDCP protocol
Note
When maintenance menu item M397 PORT CONFIGURATION is set to
"VTR mode", the protocol is set to "VTR" and this sub item is not
displayed.
Select the protocol used with the recording port.
VTR: Sony 9-pin VTR protocol
VDCP: VDCP protocol
Note
When maintenance menu item M397 PORT CONFIGURATION is set to
"VTR mode", the protocol is set to "VTR" and this sub item is not
displayed.
Select the method used to control the internal digital video processor
and to make related settings.
menu: Use the setup menu to change settings.
remote (down converter) [dc]: Control the down-converter from an
remote (up converter) [uc]: Control the up-converter from an HKDV-
In 23.98P mode, the following settings can be selected.
menu: Change settings using the setup menu.
remote [9p]: Control the unit remotely using HKDV-900 or other device
Menu items in the 300s, relating to editing operations
Settings
Select methods for setting the edit presets of the digital audio channels
a)
CH1 to CH4 of this unit. Make these settings when using an editor (PVE-
500, BVE-600, etc.) or remote control unit without a function to control
digital audio edit presets.
a)
The edit presets of the digital audio channels of this unit are turned on
and off according to the specified analog audio presets of the editor or
a)
remote control unit.
no definition [nodef]: No definition
analog ch1 [ch 1]: Follow the edit preset of analog channel 1.
a)
analog ch2 [ch 2]: Follow the edit preset of analog channel 2.
analog ch1+ch2 [ch1+2]: Follow the edit preset of analog channel 1 or
2.
(The default settings for each item are as follows)
311: analog ch1 [ch 1]
312: analog ch2 [ch 2]
313: no definition [nodef]
314: no definition [nodef]
a)
Select the type of audio transition used for linear editing.
cut edit [cut]: Cut editing (audio discontinuity at transition point, and
possible noise during playback).
cross fade [cross]: Cross-fade
HKDV-900 or another device connected to the VIDEO CONTROL
connector.
900 or another device connected to the VIDEO CONTROL
connector.
connected to the VIDEO CONTROL connector.