Sony XDS-PD1000 Operation Manual page 125

Item number Item name
951 H CROP POSITION (UC)
952 LETTER BOX POSITION (UC)
953 UP CONVERTER PROCESS
954 DETAIL GAIN (UC)
955 LIMITER (UC)
956 CRISP THRESHOLD (UC)
957 LEVEL DEPEND THRESHOLD
a)
(UC)
958 H DETAIL FREQUENCY (UC)
959 H/V RATIO (UC)
965 IMAGE ENHANCER (INPUT UP
CONVERTER)
Sub-item
1 ENH SETTING
2 CONVERT
3 H CROP P
4 L BOX P
5 CNV PROC
Menu items in the 900s, relating to digital process
Settings
a)
Adjust the H-crop (the horizontal position when cropping in the edge crop
mode) of the up-converter output when menu item 950 is set to "EDGE
CROP".
–120 to 0 to 120
a)
When menu item 950 is set to "LETTER BOX", adjust the vertical position
where the picture is cut out for up-converter output in letter box mode.
–120 to 0 to 120
a)
Select the source picture to use in converting SD to HD.
FIELD: Use field pictures.
ADAPTIVE [ADAPT]: Frame or field is selected automatically.
a)
Adjust the up-converter image enhancer. Adjust the sharpness of edge
enhancement.
00 (HEX) to 40 (HEX) to 7F (HEX)
a)
Adjust the up-converter image enhancer. Set the maximum detail level
added to emphasize the original signal.
00 (HEX) to 20 (HEX) to 3F (HEX)
a)
Adjust the up-converter image enhancer. Set the threshold amplitude for
emphasis (signals of amplitude lower than the threshold are not
emphasized).
00 (HEX) to 08 (HEX) to 0F (HEX)
Adjust the up-converter image enhancer. Set the luminance range for
edge enhancement.
00 (HEX) to 08 (HEX) to 0F (HEX)
a)
Adjust the up-converter image enhancer. Set the center frequency and
frequency properties for edge enhancement.
3.2MHz: 3.2 MHz ±1.1 MHz
4.5MHz: 4.5 MHz ±1.4 MHz
5.0MHz: 5.0 MHz ±0.7 MHz
4.0MHz: 4.0 MHz ±2.0 MHz
a)
Adjust the up-converter image enhancer. Set the horizontal/vertical ratio
for edge enhancement.
00 (HEX) to 03 (HEX) to 07 (HEX)
Set up the operation of the up converter image enhancer for SD input,
a) separately from the settings for playback (menu items 950 to 959).
pb: While SD signals are input, make the behavior of the image
enhancer of the up-converter follow the settings for playback (menu
items 950 to 959). (Settings for sub-items 2 to 11 under menu item
965 become invalid.)
input: While SD signals are input, make the behavior of the image
enhancer of the up-converter follow the settings for sub-items 2 to 11
under menu item 965 (separate settings during input of SD signals
from those during playback).
Select the up-converter mode.
EDGE CROP [CROP]: Select the edge-crop mode.
LETTER BOX [L-BOX]: Select the letter box mode.
SQUEEZE [SQUEZ]: Select the squeeze mode.
When sub-item CONVERT is set to "CROP", adjust the H-crop
(horizontal crop) position for up converter output in edge crop mode.
–120 to 0 to 120
When sub-item CONVERT is set to "L-BOX", adjust the vertical location
of the position where the picture is cut out for up converter output in letter
box mode.
–120 to 0 to 120
Select the source picture to use in converting SD to HD.
FIELD: Use field pictures.
ADAPTIVE [ADAPT]: Frame or field is selected automatically.
125
Setup Menu