Sony XDS-PD1000 Operation Manual page 46

a Type of time data
Display Meaning
CNT Counter data
TCR TC reader timecode
UBR TC reader user bits data
TCR. VITC reader timecode
UBR. VITC reader user bits data
TCG TC generator timecode
UBG TC generator user bits data
Note
If the time data or user bits data cannot be read correctly,
they will be displayed with an asterisk. For example,
"T*R", "U*R", "T*R." or "U*R.".
b Timecode reader drop-frame mark (for 59.94i/
59.94P/29.97P mode only)
".": Indicates drop-frame mode.
":": Indicates non-drop-frame mode.
c Timecode generator drop-frame mark (for 59.94i/
59.94P/29.97P mode only)
".": Indicates drop-frame mode (factory default setting).
":": Indicates non-drop-frame mode.
d VITC field mark
" " (blank): Fields 1 and 3 (for 59.94i/59.94P/29.97P/
23.98P mode) or fields 1, 3, 5 and 7 (for 50i/50P/25P
mode)
"*": Fields 2 and 4 (for 59.94i/59.94P/29.97P/23.98P
mode) or fields 2, 4, 6 and 8 (for 50i/50P/25P mode)
e Port
P1: Indicates when the playback port is selected.
R1: Indicates when the recording port is selected.
In VTR mode, the port is not displayed.
f Operation mode
The field is divided into two blocks as shown below.
• Block A displays the operation mode.
• Block B displays the servo lock status or playback speed.
A
Display
Block A Block B
STOP
NEXT xxxx
46
Superimposed Text Information
B
Operation mode
Stop mode
Cuing up to the first frame of the
next clip.
Display Operation mode
Block A Block B
PREV xxxx Cuing up to the first frame of the
current clip.
F.FWD Fast forward search
F.REV Fast reverse search
PLAY Playback mode (servo unlocked)
PLAY LOCK Playback mode (servo locked)
REC Record mode (servo unlocked)
REC LOCK Record mode (servo locked)
JOG STILL A still picture in jog mode
JOG FWD Jog mode in forward direction
JOG REV Jog mode in reverse direction
SHUTTLE STILL A still picture in shuttle mode
SHUTTLE (Speed) Shuttle mode
VAR STILL A still picture in variable-speed
mode
VAR (Speed) Variable-speed mode
TOP 0001/xxxx Cuing up to the first frame of the
first clip.
END xxxx/xxxx Cuing up to the last frame of the
last clip.
PREROLL Cuing up during thumbnail search
COPY Transcode copy is being
executed.
CLOSE A clip is not selected.
MEDIA OUT No media is loaded.
LOADING Disc is being loaded.
UNLOADING Disc is being unloaded.
STANDBY OFF Standby off mode
g Playback condition mark
One of three channel condition marks is displayed when
the DISC ACCESS indicator is lit during any mode except
recording.
Display Name Description
Green There is no problem with the
condition playback condition. This unit and
the disc can be used just as they
are. This corresponds to the
"green" channel condition
indicator of a VTR.
Yellow The playback condition has
condition deteriorated to some degree.
There are no read errors, but you
should take the action described
in the next section. This
corresponds to the "yellow"
channel condition indicator of a
VTR.