Sony XDS-PD1000 Operation Manual page 70

When copying all clips on the SxS memory card/
Professional Disc
Proceed to step 5 without carrying out clip selection
operation.
To copy part of a clip
When you select a single clip and press the arrow
buttons to set an IN and OUT point in the clip, it
becomes possible to copy the section defined by the IN
and OUT points.
On how to set an IN and OUT point, see "To copy the
specified part of a clip" (page 71).
If an HQ1920-format clip on SxS memory card (FAT
format) is converted to HD422 format and copied to
the Clip folder, transcode copy is performed
(page 72).
5
Press the COPY button.
The Clip Copy screen appears.
An example of Clip Copy screen display when copying
from SxS memory card to internal storage
To change the copy source clip
Press the RETURN button to return to the clip list
screen, and then select another clip.
To cancel the copy operation
Press the CANCEL function button (F6) or the RESET
button.
6
Press the SOURCE function button (F1) and select
"SELECTED", "ALL", or "PARTIAL".
To copy the clips selected in step 4: Select
"SELECTED".
To copy all the clips on the SxS memory card/
Professional Disc: Select "ALL".
7
Press the DEST function button (F2) and select the
copy destination media.
DISC: Clip folder on the Professional Disc
DISC USR: UserData folder on the Professional Disc
MEMORY: SxS memory card
INTERNAL: Internal storage
70
Copying
When two SxS memory cards are inserted
Press the MEMORY button, and select the copy
source card (A/B).
8
Press the START function button (F5).
Copying of the clips starts.
The progress of the copying is shown in the Clip Copy
screen, and the copy icon lights in the status display
area.
To perform an internal storage operation during
copy execution
Press INTERNAL button to switch to the internal
storage screen.
When the internal storage screen is displayed, the
display of the progress of copy processing is hidden.
To show the progress of copy processing, press the
COPY button. To hide the display of copy processing
progress, press the DISP OFF function button (F6).
To abort the copy operation
Press the ABORT function button (F1), and then press
the YES (F5) button.
The data having already been transferred to the
destination media remains on that media.
If the copy operation is completed successfully, the
message "Copy was Completed." appears.
9
Press the OK function button (F5).
The Clip Copy screen disappears, and you return to the
original screen.
Copying clips to a Professional Disc/SxS
memory card
To copy clips on an SxS memory card to a
Professional Disc
Insert the copy source SxS memory card into the card slot,
and insert the copy destination Professional Disc into the
disc slot. Then carry out the procedure described in
"Copying clips to the internal storage" (page 69).
However, press the MEMORY button in step 2 and select
the Professional Disc (DISC or DISC USR) as the copy
destination media in step 7.