Sony XDS-PD1000 Operation Manual page 33

5 Analog audio signal input/output
section
1 ANALOG AUDIO INPUT 1, 2 connectors
2 ANALOG AUDIO OUTPUT1 1, 2
3 ANALOG AUDIO MONITOR/OUTPUT2
R/1, L/2 connectors
a ANALOG AUDIO INPUT 1, 2 connectors (XLR 3-
pin, female)
These input analog audio signals.
With A1 INPUT to A4 INPUT on page P1 INPUT (see
page 49) and A5 INPUT to A8 INPUT on page P2 INPUT
of the function menu, you can assign the signal input to
connector 1 to an odd numbered channel (1, 3, 5 or 7), and
assign the signal input to connector 2 to an even numbered
channel (2, 4, 6 or 8).
You can set the reference input level with the maintenance
menu item M37: AUDIO CONFIG (see page 129).
(Factory default setting: +4 dB)
b ANALOG AUDIO OUTPUT1 1, 2 connectors
(XLR 3-pin, male)
These output analog audio signals.
In VTR mode, the playback signal is output when the unit
is playing a clip, and the E-E signal is output when the unit
is recording or set to E-E mode.
When the unit is shipped from the factory, the connector 1
is set to audio channel 1, and the connector 2 is set to audio
channel 2. You can change these settings with setup menu
item 824 ANALOG LINE OUTPUT SELECT (see
page 121).
You can set the output level with the maintenance menu
item M37: AUDIO CONFIG (see page 129). (Factory
default setting: +4 dB)
Non-audio signals are muted.
c ANALOG AUDIO MONITOR/OUTPUT2 R/1, L/
2 connectors (XLR 3-pin, male)
Output audio signals for monitoring.
The monitored channel is selected with MONITR L and
MONITR R on the HOME page of the function menu.
Output signals are E-E signals or playback signals,
according to the setting of the REC/PB2 PORT and PB1
PORT buttons on the front panel.
In VTR mode, the playback signal is output when the unit
is playing a clip, and the E-E signal is output when the unit
is recording or set to E-E mode.
connectors
1)
1) You can set E-E signal output at all times using setup menu item 156
MONITOR OUT SELECT to REC port.
See "Basic Operations of the Function Menu" (page 48)
for more information about the MONITR L and MONITR
R settings.
33
Rear Panel