Sony XDS-PD1000 Operation Manual page 145

Alarm message in clip
list screen
Disc Busy!
Chapter does not Exist.
Cannot Expand this Clip.
Unable to Parse the EDL.
Writing this AV Format to
DISC is not Permitted.
Out of Remain Space!
Alarms relating to audio and video signals
Alarm message in status Alarm message in video monitor screen Description/action
display area
No INPUT! INPUT VIDEO IS NOT DETECTED.
CHECK THE VIDEO INPUT MODE AND
SUPPLY A VIDEO SIGNAL TO VIDEO
INPUT.
EMPHASIS! INPUT AUDIO EMPHASIS IS NOT
SUPPORTED.
CHECK THE EMPHASIS OF THE AUDIO
INPUT SIGNAL.
REF Not Exist –
REF NON-STD A NON-STANDARD REF SIGNAL IS
BEING USED FOR REF VIDEO.
USE A STANDARD SIGNAL.
Alarms relating to sensors and drivers
Alarm message in status Alarm message in video monitor screen Description/action
display area
FAN(1/2) Error FAN(1/2) ERROR.
FAN(1/2) Warning FAN(1/2) WARNING.
DC Power Warning DC POWER STATUS IS NOT NORMAL.
PLEASE CONTACT SERVICE.
Power Unit(A/B) Err! POWER SUPPLY UNIT(A/B) STATUS IS
NOT NORMAL. PLEASE CONTACT
SERVICE.
DR-FAN Stop DRIVE FAN MOTOR STOPPED.
High TEMP! HIGH TEMPERATURE IN DRIVE.
High TEMP! HIGH TEMPERATURE.
Low TEMP! LOW TEMPERATURE.
CF Warning IT IS NECESSARY TO REPLACE CF
DISK. PLEASE CONTACT SERVICE.
LASER 0 Lifetime DISC DRIVE LASER 0 LIFETIME HAS
ENDED.
PLEASE CONTACT SERVICE.
Description/action
The Professional Disc was being used, so copying was not possible.
Chapter thumbnail screen cannot be displayed because no chapters are set on the clip.
The clip cannot be expanded because it is being recorded.
The EDL cannot be copied due to existence of an inhibiting condition such that there is no sub clip.
This clip cannot be copied to the currently loaded Professional Disc because of its format.
The remaining capacity of the copy destination media is not sufficient.
• Check the setting of V INPUT on page P1 INPUT of
the function menu (see page 49).
• Input an HD-SDI signal.
Check the emphasis of the audio input signal.
Input a reference signal.
Input a standard reference signal.
Contact your Sony service or sales representative.
Note
The unit will not stop operating, but if you continue to
use it in this state, temperatures inside the unit will
rise, possibly resulting in failure or fire.
The unit is being used in a low-temperature
environment.
Note
The unit will operate, but the performance of the hard
disk drives will decline, possibly affecting recording or
playback.
Contact your Sony service or sales representative.
Note
The unit will operate, but if you continue to use it, the
CF disc may be damaged and all information may be
lost.
The lifetime of the Professional Disc drive laser has
come to an end.
Contact your Sony service or sales representative.
145
Troubleshooting