Sony XDS-PD1000 Operation Manual page 71

To copy clips on the internal storage to a
Professional Disc
Insert a Professional Disc into the disc slot, and carry out
the procedure described in "Copying clips to the internal
storage" (page 69).
However, press the INTERNAL button in step 2 and select
"SELECTED" in step 6. (When the copy source media is
the internal storage, you cannot select "ALL".) Select the
Professional Disc (DISC or DISC USR) as the copy
destination media in step 7
1) For details, see "Support for mixed format recording" (page 12).
To copy clips on a Professional Disc to an SxS
memory card
Insert the copy source Professional Disc into the disc slot,
and insert the copy destination SxS memory card into the
card slot. Then carry out the procedure described in
"Copying clips to the internal storage" (see page 69).
However, press the DISC button in step 2 and select the
SxS memory card as the copy destination media in step 7.
To copy clips on the internal storage to an SxS
memory card
Insert an SxS memory card into the card slot, and carry out
the procedure described in "Copying clips to the internal
storage" (see page 69).
However, press the INTERNAL button in step 2 and select
"SELECTED" in step 6. (When the copy source media is
the internal storage, you cannot select "ALL".) Select the
SxS memory card as the copy destination media in step 7.
To copy clips from an SxS memory card to
another SxS memory card
Insert the copy source and copy destination SxS memory
cards, then carry out the procedure in "Copying clips to the
internal storage" (page 69). In step 2, press the
MEMORY button. In step 7, select SxS memory card as
the copy destination media.
To resume the aborted copying
When copying to Professional Disc, if during copying the
remaining space on the Professional Disc becomes
insufficient or the EJECT button is pressed, then the
copying to the disc stops and the disc is ejected. A message
is displayed to confirm whether you wish to replace the
disc and continue the copying or to stop the copying. If you
then insert a recordable disc, copying to the inserted disc
starts from the position where the copying to the previous
disc was aborted.
When copying to an SxS memory card, if during copying
the remaining space on the memory card becomes
insufficient, a message is displayed to confirm whether or
not to abort copying. If you then insert a recordable
memory card, you can continue copying from the point
where copying was stopped.
If continuing copying when spanning multiple media, you
can set the overlap between media in menu item 160
INTER-MEDIA OVERLAP SELECT.
1)
.
To copy an EDL file
An EDL can be copied by an operation similar to a clip
copy operation. However, it is necessary to make a copy of
all clips referenced by the EDL in advance. Therefore,
when the copy source media is an SxS memory card /
Professional Disc, "ALL" is automatically selected in step
6 of the procedure for "Copying clips to the internal
storage" (page 69).
To copy the specified part of a clip
When you set an IN and OUT point in the clip, it becomes
possible to copy only the part defined by the IN and OUT
points.
1
In the video monitor screen, cue the clip up to the
frame where you want set an IN point.
2
Press the PUSH SET knob while holding down the <
button.
An IN/OUT setting window appears in the bottom
right corner of the display.
The IN point timecode is displayed in the IN/OUT
setting window, and the IN indicator lights.
IN indicator
OUT indicator
3
Cue up to the frame where you want to set an OUT
point.
4
Press the PUSH SET knob while holding down the ,
button.
An IN/OUT setting window appears in the bottom
right corner of the display.
The OUT point timecode and the duration (DUR) are
displayed in the IN/OUT setting window, and the OUT
indicator lights.
5
Carry out step 5 and following of the procedure for
"Copying clips to the internal storage" (page 69).
71
Copying