Basic Menu Operations - Sony Betacam SX DNW-A22 Operation Manual

5-2-2 Basic Menu Operations

This section describes the basic menu displays and
how to change the settings.
For information about how to use item 013, see the section
"Switching between 525/625 line systems (menu item 013)"
(page 5-5), and for information about how to use items B01
to B14, see the section "Menu bank operations (menu items
B01 to B14" (page 5-7).
Displaying the menus
Time data display
F FWD button
MENU button
Press the MENU button, turning it on.
The F FWD button and JOG button light, and the
setting of the currently selected menu item appears in
the time data display.
Item number Item name
(flashing) (first three characters)
To display the full item name
Hold down the F FWD button.
To display the item group name
Items in the menu are arranged in groups, by the 100's
digit of the item number. To display the name of the
group to which the currently selected item belongs,
hold down the JOG button.
JOG button
Output from COMPOSITE VIDEO OUTPUT 2
(SUPER) connector
If the CHARACTER switch on the subsidiary control
panel is set to ON, then when you display a menu item
on the time data display, a full-screen version also
appears on a monitor connected to the COMPOSITE
VIDEO OUTPUT 2 (SUPER) connector as shown in
the following figure.
Group name for the
currently selected item
Cursor indicating the
currently selected
item
Setting
Item name (all characters)
Item group name
HOURS METER
*HO1:OPE HOURS
HO2:DRUM HOURS
Chapter 5 Menu System
- 102
- 52
5-3