Table of Contents
Advertisement
Setup Menu
Setup Menu Operations
To display the setup menu
Press the MENU button. The button lights and the
menu appears in the LCD display window.
Operations in the setup menu
The upper row in the LCD display window shows the
menu item name, and the lower row shows the setting
of the item.
MENU button
LCD display window
J/j buttons
To display another item or setting
Press the J button to display the next item or setting.
Press the j button to display the previous item or
setting.
When you select a new setting for an item, an asterisk
(*) appears in the setting display. To return to the
original setting, press the CLR button in the keypad.
To enter a setting value directly
Use the numeric buttons in the keypad to enter settings
directly. To add a minus sign, press the J button. To
add a plus sign, press the j button.
To return to a higher level
If the setting has two levels, you can return from the
lower to the higher level by pressing the CLR button
on the keypad.
To confirm a setting
When the desired setting appears in the LCD display
window, confirm it by pressing the ENTER button or
the SET button on the keypad. The asterisk (*)
disappears from the setting display.
To hide the setup menu
Press the MENU button again.
12
Numeric buttons
ENTER button
SET button
CLR button
Menu Items
The follow table shows the items in the setup menu.
Settings marked with asterisks (*) are the factory
defaults.
Item
Setting
REF SELECT
*REF INPUT: Input signal to SD REF
IN connector.
Select sync signal
VIDEO INPUT: Input signal to SDI IN
connector.
Y-ADD
*ON: When even and odd fields are
reversed because of signal addition
Select Y-Add filter
or removal, perform Y-ADD filter
operation mode
processing.
OFF: Do not perform Y-ADD filter
processing.
AUDIO CH5-CH8
*ON: Add.
Select whether or
OFF: Do not add.
not to add audio
data CH5 to CH8
in the SDI H-ANC
region
VITC POS-1
Setting value: *12 to 20
Select insert line
for VITC added to
output signal
VITC POS-2
Setting value: *12 to 20
Select insert line
for VITC added to
output signal
DUR INPUT
*TIME: Input time.
STYLE
RATE: Input time adjustment rate (%),
Select recorder
relative to normal speed.
side duration input
Up to 2 decimal places can be input
method
(Example: ±X.XX%).
VTRPARASET
*AUTO: Set automatically to the
default VTR parameters.
Select whether or
not to
MANUAL: Set manually
automatically set
parameters (preroll
time, edit delay)
for the recorder
and player
PREROLL TIME
Setting value: 30 to *150 to 270 frames
(30-frame units)
Preroll time setting
EDIT DELAY
Setting value: 1 to *5 to 10 frames
Edit delay setting
ABORT BEEP
*OFF: Do not beep.
Select whether to
ON: Beep until a button is pressed.
beep when a time
3SEC: Beep for 3 seconds.
adjustment
operation is
aborted
Advertisement
Table of Contents
