Table of Contents
Advertisement
DFL-900/1500 User Manual
Chapter 1
Quick Start
Step 6.
System Status
BASIC SETUP > Wizard > Run Setup Wizard > Next > Next
Here we select Fixed IP method in WAN1
port. Then the DFL-1500 provides a short
summary of the system. Please check if
anything mentioned above is properly set into
the system. Click Finish to close the wizard.
1.8
Internet Connectivity
After setting up DFL-1500 with the wizard, DFL-1500 can connect to the ISP. In this chapter, we introduce LAN1-to-WAN1
Connectivity to explain how the computers under LAN1 can access the Internet at WAN1 through DFL-1500. Subsequently, we
introduce WAN1-to-DMZ1 Connectivity to explain how the servers under DMZ1 can be accessed by the LAN1 users and other
Internet users on the WAN1 side.
You MUST press Apply to proceed to the next page. Once applying any changes, the settings are immediately
updated into the flash memory.
1.8.1 LAN1-to-WAN1 Connectivity
The LAN Settings page allows you to modify the IP address and Subnet Mask that will identify the DFL-1500 on your LAN. This is
the IP address you will enter in the URL field of your web browser to connect to the DFL-1500. It is also the IP address that all of
the computers and devices on your LAN will use as their Default Gateway.
19
Advertisement
Table of Contents
Troubleshooting
