Appendix D System Log Syntax - D-Link DFL-900 User Manual

DFL-900/1500 User Manual
In the DFL-1500, all the administration action will be logged by the system. You can refer all your management process through
System log (DEVICE STATUS > System Logs > System Access Logs). Besides, all the system log descriptions are following the
same syntax format.
In the below diagram, you can view the example of system log. The amplified system log example can be divided into 4 parts. The
first part is Component type, second part is Log ID, third part is log description and final part is Event ID. When you applied
each setting in the DFL-1500, you had been issued an Event. So the same Event ID may have many different Log IDs because you
may change different settings in the same apply action. The Event ID is a sequence number. It means that the same Log ID would
not be assigned the same Event ID every time.
So if you apply any button while setting DFL-1500 every time, an "Event" will occur immediately. And the "Event" will be
displayed in the System log.
Figure D-1 All the system log descriptions are following the same format as above
In the following table, we list all the system logs for reference.
Component type Log ID
AUTH A01
A02
Log description
User Login
User Logout
System Log Syntax
Example
AUTH: [A01] admin login success (192.168.17.102:443).
AUTH: [A01] admin login fail, miss password
(192.168.17.102:443).
AUTH: [A01] admin login fail, configuration is locked by
administrator from Console (192.168.17.102:443).
AUTH: [A01] admin login fail, configuration is locked by
another user from 192.168.17.100 (192.168.17.102:443).
AUTH: [A02] admin logout (192.168.17.102:443).
249
Appendix D
System Log Syntax
Appendix D