Part V
Virtual Private Network
Step 7.
Custom
security
settings
Select the
Data integrity encryption
. Select
integrity algorithms and
(ESP)
MD5
encryption algorithm. Fill the new key
DES
generation rate (ex. 28800 sec). Note that
the settings of this page must match the
settings of IPSec phase2 at DFL-1500.
Step 8.
New Filter Action Properties
Click the General tab. Give a name to the filter
action. For example, DES-MD5, and click OK.
Step 9.
Filter Action
Select the filter action (DES-MD5) you just
created.
D-Link
method
176