D-Link DFL-900 User Manual page 118

Part V
Virtual Private Network
Prefix
Len/Subnet Mask
Remote Address
Type
IP Address
Prefix
Len/Subnet Mask
Negotiation
Action
Mode
Encapsulation
Mode
Outgoing
Interface
Peer's IP Address
My Identifier
Peer's Identifier
D-Link
The local IP Netmask
Determine the method to connect to the local
side of VPN by using the remote subnet or the
remote single host.
The remote IP address
The remote IP Netmask
Choose Main or Aggressive mode, see Chapter
12 for details.
Choose Tunnel or Transport mode, see Chapter
12 for details.
The WAN interface you are going to build
IPSec tunnel with.
The IP address of remote VPN device. The IP
address may be fixed (Static) or dynamic.
Fill your information in this field. The filled
information will be provided for the IPSec
tunnel establishment.
Fill the information of peer VPN device in this
field. The filled information will be provided
for the IPSec tunnel establishment.
110
IPv4 format 255.255.255.0
Subnet Address /
Subnet Address
Single Address
IPv4 format 192.168.88.0
IPv4 format 255.255.255.0
Main / Aggressive
Tunnel / Transport
WAN interfaces
Static IP /
Static IP 210.2.1.1
Dynamic IP
IP Address /
FQDN (domain
name) / IP Address
User FQDN (mail
box)
IP Address /
FQDN (domain
name) / IP Address
User FQDN (mail
box)
Main
Tunnel
WAN1