D-Link DFL-900 User Manual page 194

Part VI
Content Filters
Step 2. Further Customize the local
zones
You can configure to what range the filters will
apply to the local zones. By default, the web filters
apply to all computers so the "Enforce web
filter policies for all computers" is
selected, and the range
255.255.255.255. Delete the default range by
clicking the range item and the Delete button.
Enter the IP range in the Range fields followed by
a click of the Add button to add one address
range to the web filter. Click "Include
Apply if you want web filters to only apply to the
specified ranges. Click "Ex
clude......
if you want web filters to apply to all computers
except those specified ranges.
FIELD
Exempt Computers
Enforce web filter
policies for all computers
Include specified address
ranges in the web filter
enforcement
Exclude specified
address ranges from the
web filter enforcement
Range From ___ To ___
BUTTON
Apply
Add
Delete
D-Link
ADVANCED SETTINGS > Content Filters > Web Filter > Exempt Zone
–
is
0.0.0.0
...... " and
" and Apply
DESCRIPTION
Determine which IP range will exempt the verification by the web filter
Web filter actives at all the computers, not limit range of the
IP addresses
Web filter will only active at below specified computers.
Except below specified IP address ranges. All the other IP
address range, web filter will active totally.
Here we can setup the IP address range, for the above
Exempt Computers to use.
DESCRIPTION
Apply the above selected "Exempt Computers" radius button.
Add the specified IP range which filled in the above "Range From" field.
Delete the specified IP range which filled in the above "Range From" field.
Table 21-2 Web Filter Exempt Zone setting page
Enable/Disable
Enable/Disable
Enable/Disable
IPv4 format IPv4
format
186
Range / Format EXAMPLE
disabled
Enabled
disabled
10.1.1.1 –
10.1.1.254
192.168.40.100 –
192.168.40.130