Table of Contents
Advertisement
DFL-900/1500 User Manual
5.4
Steps
5.4.1 Telnet
Step 1.
Setup Telnet
Enter 23 instead of the default 2323 in the
field. Check the
Server Port
Click the
of
Selected
, and then enter the specified
Address
(
address
140.2.5.1
DFL-1500. And click the
Apply
5.4.2 SSH
Step 1.
Setup SSH
Enter 22 in the Server Port field. Check the
LAN1/LAN2 checkbox. Click the ALL of Secure
Client IP Address for accessing DFL-1500.
And click the Apply.
5.4.3 WWW
Step 1.
Setup WWW
Check the LAN1 checkbox, and enter the new
Server Port 8080 that will be accessed by the
user's browser (http://192.168.40.254:8080). In
the Secure Client IP Address field, we select the
specified IP address "192.168.40.2". And click the
Apply button.
Note that the Secure Client IP Address is the
IP address which can be used to configure
DFL-1500.
ü Warning message
If you click the Selected of Secure Client IP Address and then enter the specified IP address which is not the same as current login IP
address, a warning message will appear to notice you that "Warning! If you are connecting to this Firewall with WWW, this action may
disconnect your session. Please remember the settings and reconnect to the firewall again." after applying the settings.
SYSTEM TOOLS > Remote Mgt. > TELNET
checkbox.
WAN1
Secure Client IP
IP
)
for
accessing
.
SYSTEM TOOLS > Remote Mgt. > SSH
SYSTEM TOOLS > Remote Mgt. > WWW
53
Chapter 5
Remote Management
Advertisement
Table of Contents
Troubleshooting
