Using The Setup Wizard - D-Link DFL-900 User Manual

DFL-900/1500 User Manual Chapter 1
Quick Start
Figure 1-10 The default settings of DFL-1500
As the above diagram Figure 1-10 illustrated, this diagram shows the default topology of DFL-1500. And you can configure the
DFL-1500 by connecting to the LAN1_IP (192.168.1.254) from the PC1_1 (192.168.1.1). In the following sections, we will teach
you how to quickly setup the DFL-1500 in the basic appliances. We are going to introduce you how to configure the VPN/Firewall
Router by the example of the DFL-1500 in this document. It is the same way to configure the DFL-900. For the related software
specification, please refer to Table 1-2.
1.7

Using the Setup Wizard

A computer on your LAN1 must be assigned an IP address and Subnet Mask from the same range as the IP address and Subnet
Mask assigned to the DFL-900/1500 in order to be able to make an HTTPS connection using a web browser. The DFL-900/1500 is
assigned an IP address of 192.168.1.254 with a Subnet Mask of 255.255.255.0 by default. The computer that will be used to
configure the DFL-900/1500 must be assigned an IP address between 192.168.1.1 and 192.168.1.253 with a Subnet Mask of
255.255.255.0 to be able to connect to the DFL-900/1500. This address range can be changed later. There are instructions in the
DFL-900/1500 Quick Installation Guide, if you do not know how to set the IP address and Subnet Mask for your computer.
15