D-Link DFL-900 User Manual page 106

Part IV
Firewall & IP/MAC Binding
BUTTON
Reset
Leave IP/MAC binding "Allow"
Step 2.
state
Select LAN1 as the interface to edit the IP/MAC
binding rules. Because we do not add current
MAC address of our PC, do not change the
Default IP/MAC settings to Block. Please keep
this state with Allow at this moment. And click
Insert to add a rule.
Note that you have to add an IP/MAC binding rule
as Allow for your computer to pass the firewall
rule before you block the LAN1-ANY direction,
otherwise you will be blocked by that rule.
FIELD
Edit __ IP/MAC binding
rules
Step 3. Add a new IP/MAC binding rule
Add an IP/MAC binding rule to allow our PC
passing through the DFL-1500. Otherwise our PC
will be blocked by DFL-1500 in the further steps.
Here the IP address "192.168.40.5" is the MAC
address of our login PC.
FIELD
Activate this rule
Rule name
D-Link
DESCRIPTION
Clear all the predefined IP/MAC binding rules.
Table 11-1 Enable IP/MAC Binding feature
Advanced Settings > IP/MAC Binding > Edit Rules
DESCRIPTION
Select the local interface which you are going to configure.
Table 11-2 Select the IP/MAC Binding configured interface
Advanced Setting > IP/MAC binding > Edit Rules > Insert
DESCRIPTION
Activate the IP/MAC binding rule.
The name of the IP/MAC binding rule.
Note that rule name should begin with alphabet, followed by
alphabet/digits/dashes.
LAN interfaces
Enabled/Disabled
text string
98
Range / Format EXAMPLE
LAN1
Range / Format EXAMPLE
Enabled
MyPC