D-Link DFL-900 User Manual page 126

Part V
Virtual Private Network
Step 3. Customize the rule
Same as those in IKE. But there is no pre-shared
key in the manual-key mode. Enter the Key for
encryption, such as 1122334455667788. Enter
the for authentication,
Key
11112222333344445555666677778888.
Additionally, the Outgoing SPI and Incoming
SPI have to be manually specified. Enter 2222
and 1111 respectively to the Outgoing SPI and
the Incoming SPI. Click Apply to store the rule.
FIELD
Active
Status
Manual Key Rule
Name
Local Address
Type
IP Address
PrefixLen
Subnet Mask
Condition
Remote Address
Type
IP Address
PrefixLen
Subnet Mask
D-Link
ADVANCED SETTINGS > VPN Settings > IPSec > Manual Key > Add
such as
DESCRIPTION
This field will activate this IPSec policy rule
The name of this IPSec policy
Determine the method to connect to the remote
side of VPN by using the local subnet or the local
single host.
The local IP address
/
The local IP Netmask
Determine the method to connect to the local side
of VPN by using the remote subnet or the remote
single host.
The remote IP address
/
The remote IP Netmask
Enable / Disable
text string
Subnet Address /
Single Address
IPv4 format
IPv4 format
Subnet Address /
Single Address
IPv4 format
IPv4 format
118
Range / Format EXAMPLE
ManualKeyrule
Subnet Address
192.168.40.0
255.255.255.0
Subnet Address
192.168.88.0
255.255.255.0
Enabled