Steps; Setup L2Tp Network Server - D-Link DFL-900 User Manual

Part V
Virtual Private Network

18.4 Steps

18.4.1 Setup L2TP Network Server

Step 1. Enable L2TP LNS
Check the Enable L2TP LNS checkbox, enter
the LAN1_IP of the DFL-1 (192.168.40.254)
in the Local IP, and enter the IP range that will
be assigned to the L2TP clients in the Start IP
and the End IP fields. Enter the IP range in the
LAC Start IP and the LAC End IP that will cover
the real IP of the remote users. In our case, since
211.54.63.1 so we can
the employee uses
fill 211.54.63.1~211.54.63.5 to cover
211.54.63.1. Enter the Username and
Password that will be used by the
employees during dial-up. C
finish configurations.
FIELD
Enable L2TP LNS
Local IP
Start
Assigned IP Range
End
Start
Secure Client IP
Range
End
Username
Password
D-Link
ADVANCED SETTINGS > VPN Settings > L2TP
to
lick the Apply
Enable L2TP LNS feature of DFL-1500
The Local IP is the allocated IP address in the internal network after default
gateway of L2TP client dials in the DFL-1500.
The Start IP is the allocated starting IP address in the internal network after
L2TP client dials in the DFL-1500.
The End IP is the allocated ending IP address in the internal network after
L2TP client dials in the DFL-1500.
The IP address starting range which is allowed user to dial in LNS server
by using L2TP protocol.
The IP address ending range which is allowed user to dial in LNS server by
using L2TP protocol.
The account which allows L2TP client user to dial in DFL-1500.
The password which allows L2TP client user to dial in DFL-1500.
Table 18-1 Setup L2TP LNS Server settings
DESCRIPTION
146
EXAMPLE
Enabled
192.168.40.254
192.168.40.200
192.168.40.253
211.54.63.1
211.54.63.5
L2tpUsers
Dif3wk