D-Link DFL-900 User Manual page 123

DFL-900/1500 User Manual
Step 1. Enable IPSec
Check the Enable IPSec checkbox and click
Apply.
Step 2. Add an IKE rule
Click the IKE hyperlink and click Add to add a
new IPSec VPN tunnel endpoint.
Step 3. Customize the rule
Check the Active checkbox. Enter a name for
this rule like IKErule. Enter the Local IP
(192.168.88.0/255.255.255.0)
Address
and the
Remote
(192.168.40.0/255.255.255.0). Select the
Outgoing interface of this VPN/Firewall
Router. Enter the public IP of the opposite-side
VPN gateway (61.2.1.1) in the Peer's IP
Address. Click the ESP Algorithm and select
Encrypt and Authenticate (DES, MD5).
Enter the Pre-Shared Key as 1234567890.
Click the Apply button to store the settings. Note,
in the Action region, you should choose either
ESP Algorithm or AH Algorithm, or system will
show error message.
ADVANCED SETTINGS > VPN Settings > IPSec
ADVANCED SETTINGS > VPN Settings > IPSec > IKE
ADVANCED SETTINGS > VPN Settings > IPSec > IKE > Add
IP Address
Self local IP
Address
The opposite
side IP Address
Virtual Private Network – IPSec
115
Chapter 13