D-Link DFL-900 User Manual page 92

Part IV
Firewall & IP/MAC Binding
FIELD
Define Objects on __
Step 2. Insert a new Address object
Enter the Address name. Select which address
type the address object will be. And then enter the
IP address.
FIELD
Address name
Address Type
Step 3. View the Address object
settings
After entering the new
subsequently we add the other two address
objects. The result is shown in the "Object" page.
Note: It is the same way to setup address objects
in the other interfaces.
D-Link
DESCRIPTION
Select the interface which you are going to define address
object.
Table 9-1 Define the address objects
BASIC SETUP > Books > Address > Object > Insert
DESCRIPTION
The name of the address object.
Note that address name should be an alphanumeric value
(including dash '-' and underscore '_'), can start with a
letter only and, please note, it is case-sensitive! Spaces and
other special characters are not allowed.
The address type of the object.
Table 9-2 The field of the Address object
BASIC SETUP > Books > Address > Objects
Address object,
All the interfaces
Range / Format
text string
Subnet / Range /
Host
84
Range / Format EXAMPLE
LAN1
EXAMPLE
PC1_1
192.168.40.1
Host