D-Link DFL-900 User Manual page 219

DFL-900/1500 User Manual
BUTTON
Prev. Page
Next Page
Create-Sub-class
Edit
Delete
Step 3. Add new classes
Create a sub-class named web-from-WAN from
the default class. Enter 0.3% in the bandwidth
field. Make sure that Borrow button is unchecked
and then web-from-WAN class will not enlarge
the bandwidth from borrowing other unused
bandwidth. Finally, click Apply button. See the
steps in the right diagram.
Subsequently, we will continue to setup another
two classes, such as video-from-WAN class and
web-from-DMZ class. Select the default class and
click the Create Sub-Class to create these two
classes. The setting procedure is the same as the
web-from-WAN class described.
FIELD
Activate this class
Class name
Bandwidth
Borrow
BUTTON
Back
Apply
If there are more than one action pages, you can press Prev. Page to back to the previous page.
If there are more than one action pages, you can press Next Page to go to the next page.
Create a sub class from the indicated class.
Edit the properties of the existent class.
Delete the indicated class.
Table 25-4 Setup edit actions page of Bandwidth Management
ADVANCED SETTINGS > Bandwidth Mgt. > Edit Actions > Create
Sub-class
DESCRIPTION
Enable the bandwidth management class for later using
Bandwidth management class name
How many percentage does this class occupy higher class?
When the bandwidth of other class is idle, it will use the
bandwidth of other class to increase bandwidth temporarily.
back to previous configuration page.
Apply the settings which have been configured.
Table 25-5 Add new class in the bandwidth management feature
DESCRIPTION
DESCRIPTION
211
Chapter 25
Bandwidth Management
Range/Format EXAMPLE
Enable/Disable
text string web-from-WAN
0.1 ~ Max Value
(as red text
described)
Enable/Disable
Enabled
0.3
Disabled