Steps - D-Link DFL-900 User Manual

DFL-900/1500 User Manual

21.4 Steps

Step 1. Enable Web Filter
Check the Enable Web Filter checkbox and
click the Apply right on the right side.
FIELD
Enable Web Filter
Enable Web Proxy
Filtering
ü Warning message
While enabling the web filter feature, it will show the warning message saying that if you block any web traffic from LAN-to-WAN in
Firewall, the access control is shifted to the Web Filter. Namely, if you block someone to access the web at the WAN side, after
enabling the web filter, he can resume accessing the web until you set a content filter rule to block it.
ADVANCED SETTINGS > Content Filters > Web Filter > Web
DESCRIPTION
Enable Web Filter feature of DFL-1500
If enabling this feature, all the web pages pass through proxy
(Only port 3128) will also be verified by DFL-1500. If
disabling the "Web Proxy", all the web pages through will
bypass the verification.
Table 21-1 Enable Web Filter
Content Filtering – Web Filters
185
Chapter 21
Range / Format EXAMPLE
Enable/Disable Enabled
Enable/Disable Disabled