D-Link DFL-900 User Manual page 159

DFL-900/1500 User Manual
Step 4. Detailed settings of IPSec IKE
In this page, we will set the detailed value of IKE
parameter.
Step 5. Remind to add a Firewall rule
After finishing IPSec rule settings, we need to add
a firewall rule. Here system shows a window
message to remind you of adding a firewall rule.
Just press the OK button to add a firewall rule.
Step 6. Add a Firewall rule
Beforehand, please make sure that the Firewall is
enabled. Select WAN1-to-LAN1 to display the rules
of this direction. The default action of this
direction is Block with Logs. We have to allow
the VPN traffic from the WAN1 side to enter our
LAN1 side. So we click the Insert button to add
a Firewall rule before the default rule.
Remote Access VPN – DS-601 VPN client
ADVANCED SETTINGS > VPN Settings > IPSec > IKE > Add >
Advanced
ADVANCED SETTINGS > VPN Settings > IPSec > IKE > Add
ADVANCED SETTINGS > Firewall > Edit Rules
151
Chapter 19