Installing the upper bezel
To install the upper bezel, complete the following steps:
1. Insert the two tabs on the right-side of the upper bezel into the corresponding
2. Rotate the upper bezel to the left side of the chassis until the bezel clips 1 are
3. Install the lower bezel (see "Installing the lower bezel" on page 65).
4. Install the side cover (see "Installing the side cover" on page 63).
5. Lock the side cover.
6. Reconnect the external cables and power cords; then, turn on the attached
holes on the right side of the chassis.
aligned with the corresponding indentations on the left side of the chassis and it
snaps into place.
devices and turn on the server.
Chapter 4. Removing and replacing server components
67