To remove a hot-swap power supply, complete the following steps:
1. Read the safety information that begins on page vii and "Installation guidelines"
2. Disconnect the power cord from the power supply that is to be removed.
3. Press down on the orange release lever 1 and pull the power supply 2 out
4. If you are instructed to return the power supply, follow all packaging instructions,
82
ThinkServer TS100 Types 6431, 6432, 6433, and 6434: Hardware Maintenance Manual
on page 57.
of the bay, using the handle.
and use any packaging materials for shipping that are supplied to you.