Lenovo ThinkServer TS100 Hardware Maintenance Manual page 90

Removing a CD or DVD drive
To remove a CD or DVD drive, complete the following steps:
1. Read the safety information that begins on page vii and "Installation guidelines"
2. Turn off the server and all attached devices; then, disconnect all power cords
3. Unlock and remove the side cover (see "Removing the side cover" on page 62).
4. Remove the lower bezel (see "Removing the lower bezel" on page 64).
5. Remove the upper bezel (see "Removing the upper bezel" on page 66).
6. Disconnect the power and signal cables from the drive that is to be removed.
7. Press and hold the blue release button 1 on the side of the bay to release the
8. Remove the drive retainer clip 2 from the side of the drive. Save the clip to
9. If you are instructed to return the drive, follow all packaging instructions, and
72
ThinkServer TS100 Types 6431, 6432, 6433, and 6434: Hardware Maintenance Manual
on page 57.
and external cables.
drive; then, pull the drive out of the front of the server.
use when you install the replacement drive.
use any packaging materials for shipping that are supplied to you.