Table of Contents
Advertisement
6
Setup
CAUTION
Privacy masks block out parts of the camera image entirely and appear as black boxes in recordings.
To configure video overlay:
1. Under Privacy Masking, you can create up to four privacy masks.
• Click the corners of a privacy area to adjust the size of the privacy area.
• Right-click to delete the currently selected privacy area.
• Click-and-drag outside of the privacy areas to create a new privacy area.
• Click Save to save changes.
6.1.8 Path
The Path tab allows you to configure the folder where snapshots and manual recordings
are saved to.
To configure the recording and snapshot folder:
1. Configure the following:
• Live Snapshot: The folder on your hard drive where snapshots are stored. Click
Browse to select a different folder.
• Live Record: The folder on your hard drive where manual recordings are stored.
Click Browse to select a different folder.
• Playback Snapshot: The folder on your hard drive where playback snapshots are
stored. Click Browse to select a different folder.
• Playback Download: The folder on your hard drive where playback downloads are
stored. Click Browse to select a different folder.
• Video Clips: The folder on your hard drive where video clips are stored. Click
Browse to select a different folder.
NOTE
An SD / microSD card (not included) must be installed to use playback functions. Check the technical
specifications for your camera to see it supports SD / microSD cards.
2. Click Save to save changes.
6.1.9 Audio
The Audio tab allows you to enable / disable camera audio as well as choose the audio en-
coding type. The settings in this menu will affect both one-directional and bidirectional
audio for the camera.
NOTE
This setting is only available on cameras with a microphone. Check the technical specifications for your
camera.
#LX400062; r. 1.0/24298/24299; en-US
20
Advertisement
Table of Contents
