Table of Contents
Advertisement
6
Setup
To set up FTP settings:
1. Check Enable to enable recording to FTP.
2. Configure the following:
• Server Address: Enter the IP address or DNS address of the FTP server.
• Port: Enter the FTP server port number.
• User Name: Enter the user name for the FTP server.
• Password: Enter the password for the FTP server.
• Remote directory: Enter the recording directory on the FTP server (e.g. share).
NOTE
The recording directory must be located one level below the root directory. For example, share is
acceptable, but not share/recordings.
• Check Emergency (Local) to enable microSD recording if the FTP server cannot
be reached.
3. Click Save to save changes.
6.4.7 NAS
The NAS tab allows you to set up settings for recording to a NAS (network attached
storage).
To set up NAS settings:
1. Check Enable to enable recording to NAS.
2. Configure the following:
• Server Address: Enter the IP address or DNS address of the NAS.
• Remote directory: Enter the recording directory on the NAS (e.g. share).
NOTE
The recording directory must be located one level below the root directory. For example, share is
acceptable, but not share/recordings.
3. Click Save to save changes.
6.4.8 Record Control
The Record Control menu allows you to configure recording parameters for the camera.
#LX400062; r. 1.0/24298/24299; en-US
39
Advertisement
Table of Contents
