Path - FLIR TCX series Instruction Manual

6
Setup
To reset PTZ defaults:
1. Under PTZ > Function, click Default.
2. Click the Default button. You will be prompted to confirm the reset.
CAUTION
Resetting to defaults will eras any custom PTZ functions you have created — this step cannot be
undone.

6.1.13 Path

The Path tab allows you to configure the folder where snapshots and manual recordings
are saved to.
To configure the recording and snapshot folder:
1. Configure the following:
• Live Snapshot: The folder on your hard drive where snapshots are stored. Click
Browse to select a different folder.
• Live Record: The folder on your hard drive where manual recordings are stored.
Click Browse to select a different folder.
• Playback Snapshot: The folder on your hard drive where playback snapshots
are stored. Click Browse to select a different folder.
• Playback Download: The folder on your hard drive where playback downloads
are stored. Click Browse to select a different folder.
• Video Clips: The folder on your hard drive where video clips are stored. Click
Browse to select a different folder.
NOTE
An SD / microSD card (not included) must be installed to use playback functions. Check the techni-
cal specifications for your camera to see it supports SD / microSD cards.
2. Click Save to save changes.
#LX400062; r.30885/35920; en-US
28