Table of Contents
Advertisement
6
Setup
To configure snapshots:
1. Configure the following:
• Snapshot Type: Select Continuous to configure snapshots taken using scheduled
recording. Select Event to configure snapshots activated by alarms.
• Image Size: The image size of snapshots is the same as the resolution for the
stream selected.
• Quality: Select the image quality for snapshots between 1 (lowest) and 6 (highest).
• Interval: Select the interval between snapshots between 1 and 7 seconds. Select
Customized to select an interval from 1~50000 seconds.
2. Click Save to save changes.
6.1.6 Overlay
The Overlay tab allows you to configure the text and information that appears overtop of
the camera image, such as time and date display. Click Enable or Disable for each of the
sub tabs described below on the Overlay tab.
To configure video overlay:
1. Under Channel Title, click Enable to show the name of the channel on screen. Under
Input channel title, enter a personalized channel name. Click and drag the Channel
Title box to any location on the screen.
#LX400062; r. 1.0/24298/24299; en-US
18
Advertisement
Table of Contents
