Table of Contents
Advertisement
6
Setup
To configure recording parameters:
1. Under Pack Duration, enter the duration in minutes that the camera will use to pack
video.
2. Under Pre-event Record, enter the duration in seconds that the camera will pre-re-
cord before motion events.
3. Under Disk Full, select Overwrite to overwrite recordings when the recording medium
is full or select Stop to stop recording when the recording medium is full.
• Under Record Mode, select Auto to record according to the schedule, select Man-
ual to record continuously, or select Off to disable recording.
4. Under Record Stream, select Main Stream to record using the Main Stream settings,
or select Substream to record the substream.
5. Click Save to save changes.
6.5 System
6.5.1 General
The General menu allows you to configure general camera settings.
To configure general camera settings:
1. Under Device Name, enter a name for the camera.
2. Under Language, select the language that will be used for the web browser interface.
3. Under Video Standard, select NTSC (North America) or PAL (Europe).
4. Click Save.
6.5.2 Date & Time
The Date & Time tab allows you to set up date and time settings for the IP camera.
#LX400062; r. 1.0/24298/24299; en-US
40
Advertisement
Table of Contents
