Table of Contents
Advertisement
5
Live View
3. Menu Tabs
• Live: Click to access Live View.
• PTZ: On micro PT cameras, the PTZ Control Panel is opened using the PTZ tab,
which replaces the button on the Video Display Controls panel.
• Playback: Click to playback video from the camera's microSD card (cameras that
support microSD only).
• Setup: Click to setup camera functions.
• Alarm: Click to configure alarms.
• Logout: Log out of the camera.
4. Live View Functions (
•
Alarm Output: Click to activate an alarm output device connected to the cam-
era (cameras with alarm I/O only).
•
Digital Zoom: Click to activate digital zoom mode. Click-and-drag in the video
area to select an area to zoom to, then drag to move the zoomed area or follow mo-
tion in the video. Right-click to return to full frame view.
•
Snapshot: Click to save a snapshot from the camera to your computer hard
drive. To configure the folder where snapshots are saved, see 6.1.8 Path, page 20.
NOTE
Depending on your computer's security settings, you may need to run your browser as administra-
tor to save snapshots or manual recordings.
•
Triple Snapshot: Save the next three frames from the camera as snapshots.
•
Manual Record: Click to start manually recording live video to your computer
hard drive. Click again to stop recording. To configure the folder where manual re-
cordings are saved, see 6.1.8 Path, page 20.
•
Manual Focus (motorized lens cameras only): Click to display the AF Peak
and AF Max parameters for auto focus. The closer AF Peak and AF Max are, the
better the focus effect is.
•
Audio Output: Click to mute / un-mute audio coming from the camera (audio-
enabled cameras only; must have self-powered microphone connected to the
camera).
#LX400062; r. 1.0/24298/24299; en-US
)
9
Advertisement
Table of Contents
