Table of Contents
Advertisement
6
Setup
4. Check Relay-out to trigger an alarm out device when Capacity Warnings occur. Under
Alarm Delay, enter the number of seconds before the alarm out device will be
activated.
NOTE
Relay-out is only available if your camera supports alarm output. Check the technical specifications
for your camera.
5. Check Send Email to send an email alert when Capacity Warnings occur.
6. Click Save to save changes.
To configure SD Card Errors:
An SD Card Error occurs if an error occurs recording to the SD / microSD card (for exam-
ple, if the card is damaged or is using the wrong file system).
NOTE
The SD Card Error warning is only available on cameras that support SD / microSD cards. Check the
technical specifications for your camera.
To configure SD Card Errors:
1. Under Event Type, select SD Card Error.
2. Check Enable to enable SD Card Errors.
3. Check Relay-out to trigger an alarm out device when SD Card Errors occur. Under
Alarm Delay, enter the number of seconds before the alarm out device will be
activated.
NOTE
Relay-out is only available if your camera supports alarm output. Check the technical specifications
for your camera.
4. Check Send Email to send an email alert when SD Card Errors occur.
5. Click Save to save changes.
To configure Disconnection errors:
A Disconnection error occurs if the camera is disconnected from the network.
#LX400062; r. 1.0/24298/24299; en-US
32
Advertisement
Table of Contents
