Table of Contents
Advertisement
6
Setup
To configure the thermal image profile:
1. Click Indoor, Outdoor, or General (called Default if the camera is in MPX mode) to
change the camera image profile.
Indoor (Sharpness = 0, Gamma = 3, Smart Scene = 50%)
Outdoor (Sharpness = 20, Gamma = 5, Smart Scene = 15%)
General (Sharpness = 10, Gamma = 3, Smart Scene = 15%)
2. If needed, you can make fine-tune adjustments using the Sharpness (DDE), Gamma
(ACE), and Smart Scene Optimization (SSO) settings. Select Restore to set all values
back to their default settings.
#LX400062; r. 1.0/24298/24299; en-US
11
Advertisement
Table of Contents
