Table of Contents
Advertisement
6
Setup
2. To configure a schedule when motion detection will be activated, click Setup next to
Working Period.
• Select the day you would like to configure by clicking the Setup buttons. You can
apply the same schedule to multiple days using the checkboxes.
• Configure up to 6 time periods when motion detection will be activated.
• Click Save. Repeat the steps above if you would like to apply a different schedule to
different days.
3. Under Anti-dither, enter the anti-dither time. After a motion event occurs and motion
stops, if motion is detected within the anti-dither time, the system continues the motion
event and includes the new motion within the first event, rather than creating a new
motion event.
#LX400062; r. 1.0/24298/24299; en-US
28
Advertisement
Table of Contents
