Private Sphere/Security; Turning Ringer Cutoff On And Off; Turning Do Not Disturb On And Off - Siemens HiPath 500 Operating Instructions Manual

Step by Step
Ringer cutoff on?
Ringer cutoff off?
qml
or
DND on?
DND off?
qmk
or

Private Sphere/Security

Turning Ringer Cutoff On and Off

You can activate the ringer cutoff function if you do not
want the receive any calls. Calls are only identified by
one ring signal, an indication on the display, and a key
which has been programmed to flash (such as a trunk
key).
Select and confirm
or
or
rml
Enter the code for "on" or "off".

Turning Do Not Disturb On and Off

You can activate the do not disturb function if you do not
want the receive any calls. When do not disturb is acti-
vated, internal callers hear a busy signal and external
callers are rerouted to a telephone assigned for this pur-
pose (contact your service personnel).
Select and confirm.
or
or
rmk
Enter the code for "on" or "off".
[1] "Different Displays in a HiPath 4000 Environment
(Not for HiPath 500)"
1
.
When you lift the handset, a special dial tone
(continuous buzzing tone) reminds you that do
not disturb is active.
Authorized internal callers can automatically
override the do not disturb function after five sec-
onds.
Page 112
Private Sphere/Security
71