Privacy/Security; Turning Ringer Cutoff On And Off; Activating/Deactivating "Do Not Disturb - Siemens HiPath 500 Operating Instructions Manual

Step by Step
Ringer cutoff on
Ringer cutoff off
DND on
DND off

Privacy/security

Turning ringer cutoff on and off

If you do not wish to take calls, you can activate the rin-
ger cutoff function. Calls are only identified by one ring
signal, an indication on the display, and a key which has
been programmed to flash (such as a trunk key).
Activating
c
Open the idle menu
Select and confirm the option shown
Deactivating
c
Open the idle menu
Confirm.
Activating/deactivating "Do not dis-
turb"
If you do not wish to take calls, you can activate do not
disturb. Internal callers hear the busy tone, external cal-
lers are connected to another phone, which you can
specify (contact your service personnel).
Activating
c
Open the idle menu
Select and confirm the option shown.
Activating
c
Open the idle menu
Confirm.
When you lift the handset, you will hear a special
tone (continuous buzzing) reminding you that "Do
not disturb" is activated.
Authorized internal callers automatically override
the DND feature after five seconds.
[1] "Different Displays in a HiPath 4000 Environment"
Privacy/security
page 22.
[1]
.
page 22.
page 22.
page 22.
77