Turning Do Not Disturb On And Off; Turning Ringer Cutoff On And Off - Siemens HiPath 3000 Opearting Instructions

Step by Step
DND on?
DND off?
FB@
or
Ringer cutoff on?
Ringer cutoff off?
FBA
or

Turning Do Not Disturb On and Off

You can activate the do not disturb function if you do not
want the receive any calls. When do not disturb is acti-
vated, internal callers hear a busy signal and external
callers are rerouted to a telephone assigned for this pur-
pose (ask the service personnel).
Select and confirm.
or
or
GB@
Enter the code for "on" or "off".

Turning Ringer Cutoff On and Off

You can activate the ringer cutoff function if you do not
want the receive any calls. Calls are only identified by
one ring signal, an indication on the display, and a key
which has been programmed to flash (such as a trunk
key).
Select and confirm.
or
or
GBA
Enter the code for "on" or "off".
When you lift the handset, a special dial tone
(continuous buzzing tone) reminds you that do
not disturb is active.
Authorized internal callers can automatically
override the do not disturb function after five sec-
onds.
Making and Answering Calls
19