System
6-4-4
Startup Mode
1,2,3...
Procedure
1,2,3...
204
Sets the scene number and mode to be displayed when the power is
turned ON.
If the V530-R150 is set to start in RUN mode for the scene where the
desired reading conditions are registered, reading can be started by
simply turning the power ON.
1.
Select the startup scene number. (0 to 9; Default setting: 0)
2.
Select the startup mode. (SET, MON, or RUN; Default setting:
MON)
1.
Select Startup mode.
2.
Select the startup scene number and startup mode.
3.
Select End before leaving this screen.
Section 6-4