Communications Method - Omron V530-R150E-3 Operation Manual

System
6-4-2

Communications Method

RS-232C
1,2,3...
194
Sets communications methods when communicating to external
devices via terminal blocks or RS-232C.
• When communicating in normal format via RS-232C:
Set the communications method for RS-232C and Normal.
• When communicating with host link via RS-232C:
Set the communication method for RS-232C and Host link.
• When inputting trigger or outputting reading results (OK/NG) to
the OK/NG terminals on terminal blocks:
Set the communications method for Terminal block.
1. Select 2400, 4800, 9600, 19200, or 38400 (bps).
(Default setting: 38400)
2. Select 7 or 8 (bits). (Default setting: 8)
3. Select None, Odd, or Even. (Default setting: None)
4. Select 1 or 2 (bits). (Default setting:1)
5. Select None, STX, or ESC. (Default setting: None)
6. Select CR, LF, or CR+LF, ETX. (Default setting: CR)
7. Select OFF or ON. (Default setting: OFF)
8. Select Normal, Host link, 3964, or 3964R (Default setting: Nor-
mal)
Section 6-4