SET (Setting) Mode
6-1-9
Read QR (Normal)
1. Read QR (Normal)
Teaching Procedure
1,2,3...
158
Reading Settings (Teaching)
Using the teaching function, a reading image is obtained, measure-
ment is performed on this image, and based on the results of this
measurement, parameters for reading conditions (Right & Left
Reverse, Gray Edge Value) are automatically determined. The results
of the settings made using the teaching function can be viewed in
Reading Settings (Manual).
1.
Select Read QR (Normal).
2.
Select Reading Settings (Teaching).
3.
Select the required symbol color.
Section 6-1