Version Information - Omron V530-R150E-3 Operation Manual

Data Compatibility
The software version for this V530-R150E-3/EP-3 is "Ver. 3.00." Scene data and system
data for the V530-R150E-2/EP-2 (version 2.@@) cannot be used.
Changes from Version 2.@@ to Version 3.00
The following table lists functions in the V530-R150E-3/EP-3 (Version 3.00) that are dif-
ferent from the V530-R150E-2/EP-2 (Version 2.@@).
Change
Increased number of com-
patible Data Matrix ver-
sions
Increased number of com-
patible ECC200 Data
Matrix sizes
A Two-camera Unit can be
connected
Cameras with Intelligent
Light Sources can be con-
nected
Increased number of com-
mands that can be input
from RS-232C
An explanation of each pro-
cess is displayed
Added a timeout function
Binary images can be dis-
played
Appendix E

Version Information

Data Matrix versions ECC000, ECC050, ECC080, ECC100, and
“
ECC140 can be decoded.
page 4, page 268, page 269
™ ™
Square matrix sizes 10
“
8 18 to 16 64 can be used.
page 4, page 267
“
Two Cameras can be connected to a single V530-R150.
page 6, page 26
Cameras with Intelligent Light Sources can be connected, so light
“
levels can be adjusted from the V530-R150.
page 18, page 131
Commands have been added that allow reading conditions and sys-
“
tem conditions to be changed from a host computer.
page 56
A message explaining each process is displayed on the monitor so
“
even first-time users can easily understand the operations.
page 104
A timeout time can be set for all reading modes. The read operation
“
will be cancelled automatically if it exceeds the timeout time.
page 161, page 169, page 139, page 155
Binary images can be displayed on the monitor using the decoding
threshold setting as the threshold value. This function can be used
to check the white and black cells that the V530-R150 actually rec-
“
ognized in the code read from the camera.
page 142
Description
™ ™
10 to 64 64 and rectangular matrix sizes
277