Omron V530-R150E-3 Operation Manual page 107

Connection Examples
Communication Settings
Program Examples
1,2,3...
90
• V530-R150 “ page 194
Item
Baud rate
Data length
Parity bits
Stop bits
Header
Footer
Mode
• Programmable Controller:
Turn OFF the DIP switch of CQM1H.
Set DM6645 to [1001], DM6646 to [0904], DM6648 to [1000] and
DM6649 to [0D00].
Match communication settings with the V530-R150. Refer to the
operation manual for CQM1H for the ways to change the setting.
This is an example of a program in which a Programmable Controller
(CQM1H) receives the data which is read at a V530-R150.
1. Set the reading conditions of the V530-R150 and set the reading
mode to RUN mode.
2. The synchronous sensor or trigger input of the console sends the
reading trigger to the V530-R150.
“ The V530-R150 reads the code and outputs data.
3. The data received from the CQM1H is saved in order from the
highest digit in DM0200 from the first bit.
Setting
19200 bps
8 bit
EVEN
2 bit
None
CR
Normal
Clears DM0200 to
DM0220.
Stores reading data in
order from DM0200.
Section 4-5