Omron V530-R150E-3 Operation Manual page 13

Installation Precautions
Installation
Orientation of Controller
INCORRECT
Ambient Temperature
xiv
To improve heat dissipation, install the controller in the following ori-
entation only:
CORRECT
Do not install the controller in the orientations shown in the following
diagram.
• Maintain a minimum clearance of 50mm above and below V530-
R150 components to improve air circulation.
• Do not install V530-R150 components immediately above strong
heat sources, such as heaters, transformers, or large-capacity
resistors.
• Do not let the ambient operating temperature exceed 50•C.
INCORRECT
3