Computer Data Backup (Tool Menu)
Loading Data From the Computer (V530-R150 Personal Computer)
Procedure
1,2,3...
1.
Follow steps 1 to 3 in the above procedure to connect the V530-
R150 and the computer.
2.
Select Transfer/Send File from the Hyper Terminal menu.
3.
Select the file to be loaded.
4.
Use Xmodem protocol.
5.
Select Send.
The data transfer screen will be displayed.
6.
Once the computer preparations have been completed, display
the Monitor mode or Run mode screen.
7.
Move the cursor to RUN or MON and press the ENT Key.
The mode selection menu will be displayed.
8.
Select TOOL from the menu.
The Backup operations menu will be displayed.
Section 6-5
217