Step 3 Checking Reading - Omron V530-R150E-3 Operation Manual

STEP 3 Checking Reading

5-4

STEP 3 Checking Reading

Procedure
1,2,3...
112
(Manual) from the screen shown in step 8, and press the ENT
Key. The teaching function will be turned OFF by entering the
Reading Settings (Manual) window.
13. This completes the settings.
Confirm whether reading is performed correctly under the setting
conditions. The reading is performed in MON (monitor) mode. Read-
ing judgment is not output to terminal blocks or RS-232C but dis-
played on the monitor.
1. Press the ESC Key from the basic screen of SET mode to enter
MON (monitor) mode.
Section 5-4