Intermec EasyCoder 601 XP Service Manual page 11

1.1 Identification,
Intermec EasyCoder 601 XP – Service Manual Ed. 2
If the printer is working and possible startup program can be
cont'd.
interrupted, the type of program in the printer can be identified.
Connect printer and computer, open a suitable communication
program, and start up the printer in Fingerprint's immediate mode.
The instruction FILES allows you to check what files the various
parts of the printer's memory contain. The statements FONTS and
IMAGES can be used for the same purpose regarding fonts and
images. Use the VERSION$ function to check version of the
Intermec Fingerprint firmware.
You can read the setup in the Setup Mode or by means of Intermec
Shell, which also allows you to print test label #5 containing the
present setup values. To enter Shell if a custom-made autoexec-file
prevents access, lift the printhead and press any key on the printer's
keyboard (except the <Shift> key), then turn on the power while
continuing to press the key. When the Shell countdown begins,
release the key and press <Enter> to start Shell. Do not forget to
lower the printhead if you want to print e.g. test labels. Refer to the
Installation & Operation manual and to Appendix 1 in this Service
Manual for more information on the Setup Mode and the Intermec
Shell startup program.
If the printer still does not work, you may need to interview the user.
By now, you should have a fairly good idea what kind of printer you
will be working with. Compare with the list of standard features and
options on next page.
Chapter 1 Models and Options
10