Easycoder 601 Xp: Setup Mode Overview, Part 1 - Intermec EasyCoder 601 XP Service Manual

Setup Mode Overview, Part 1 (FP 7.12)
SETUP:
SER-COM,UART1
SETUP:
SER-COM,UART2
If an optional interface board
is fitted, communication setup
menus for the additional channel
"uart2:" will be displayed too.
SETUP: DETECTION:
FEEDADJ
FEEDADJ
Continued on next page!
Intermec EasyCoder 601 XP – Service Manual Ed. 2
SER-COM,UART1:
BAUDRATE
SER-COM,UART1:
CHAR LENGTH
SER-COM,UART1:
PARITY
SER-COM,UART1:
STOP BITS
SER-COM,UART1:
FLOWCONTROL
SER-COM,UART1:
NEW LINE
SER-COM,UART1:
REC BUF
SER-COM,UART1:
TRANS BUF
SER-COM,UART2:
CONNECTED HW
FEEDADJ:
STARTADJ
FEEDADJ:
STOPADJ
BAUDRATE:
9600
19200
38400
57600
300
600
1200
2400
4800
CHAR LENGTH:
8
7
PARITY:
NONE
EVEN
ODD
MARK
SPACE
STOPBITS:
1
2
FLOWCONTROL:
RTS/CTS
FLOWCONTROL:
ENQ/ACK
FLOWCONTROL:
XON/XOFF
NEW LINE:
CR/LF
LF
CR
REC BUF:
[300]:
TRANS BUF:
[300]:
The selected type of hardware connection on "uart2:"
CONNECTED HW:
is displayed as one of the following alternatives (read-only):
RS232
• RS 232
• 422 NON ISOLATED
• 422 ISOLATED
STARTADJ:
[0]:
STOPADJ:
[0]:
Appendix 1 Program Overviews
LEGEND:
Boxes with thick lines indicate default setup
Boxes with dotted lines indicate menus related to
optional interface boards.
RTS/CTS flowcontrol cannot be
RTS/CTS:
selected for the following types of
DISABLE
hardware connection on the optional
ENABLE
interface board ("uart2:"):
• 422 NON ISOLATED
• 422 ISOLATED
ENQ/ACK:
DISABLE
ENABLE
XON/XOFF:
DATA TO HOST
XON/XOFF:
DATA FROM HOST
DATA TO HOST:
DISABLE
ENABLE
DATA FROM HOST:
DISABLE
ENABLE
150