Pages Per Side (Copying Two Pages Onto One Sheet); Staple - Fuji Xerox ApeosPort-IV 5070 User Manual

3 Copy

2 Pages per Side (Copying Two Pages onto One Sheet)

This feature allows you to copy two pages of a document together onto one side of a
single sheet of paper.
When you select [2 Pages per Side], [Auto %] is automatically selected in [Reduce/
Enlarge]. The machine automatically sets the copy ratio and makes copies of the
images so that they fit on the selected paper.
Note
For information on how to copy four or eight pages of a document together onto one side of a single
sheet of paper, refer to "Pages per Side (Copying Multiple Pages onto One Sheet)" (P.116).
1
Select [2 Pages per Side].
3

1 Staple

This feature allows you to select whether to staple copied outputs at the top left corner.
The number of sheets that can be stapled is 2 - 50 (when 80 gsm paper is used).
Available paper types are: Plain (60 - 105 gsm), Reload (60 - 105 gsm), Recycled (60
- 105 gsm), Punched (60 - 105 gsm), Letterhead (60 - 105 gsm)*, Pre-printed (60 - 105
gsm), Lightweight (56 - 59 gsm), Heavyweight (106 - 169 gsm), Extra Heavyweight
(170 - 216 gsm), Bond (170 - 216 gsm), and Custom Paper 1 to 5.
*: Only when the HCF Kit is installed
Note
1
Select [1 Staple].
84
• When you deselect [Auto %] in [Reduce/Enlarge] (when you select another copy ratio),
image loss may occur depending on the image size of the document.
• Select a tray other than [Auto Select] in [Paper Supply]. When you select [Auto Select], the
tray containing A4 paper is selected. If no tray contains A4 paper, the machine selects a tray
based on the [Auto Paper Off] setting. For information on [Auto Paper Off], refer to "5 Tools"
> "Copy Service Settings" > "Copy Control" > "Auto Paper Off" in the Administrator Guide.
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.